Description
Ion Pump Power Pac System with Battery and Stand
System Includes:
- MPPIII 1-3 HP Sump Pump Power Pac System (2 pumps, controller, inverter, and pre-piped)
- 1, Power Plus battery
- 1, Battery box stand
BA33M 1/3 HP Sump Pump
Features:
- (2) ⅓ HP pumps with PSC motor
- Recommended minimum basin size: 18 x 24"
- Includes Ion Genesis® controller, 1½" check valve and 1½" Sch. 40 PVC piping
- Every cycle alternates to the other pump
- Low amp draw pumps 4.5 amps
- Each pump rated up to 3180 GPH
- Factory built; easy and quick to install
- Built-in alarm system
- Thermal overload protection
- Energy efficient motor
- Carbon ceramic mechanical seal
- Stainless steel screen prevents debris from entering the pump
- 3 year warranty
System Specifications
- Maximum Capacity Up to 68 GPM Maximum Head Up to 25′
- Electrical Data 115 V, 1 Ø, 4.5 FLA, 60 Hz
- Motor Data ⅓ HP, 3450 RPM
- Recommended Minimum Basin Size 18″ x 24″
- Materials of Construction Cast iron & stainless steel Impeller
- Thermoplastic vortex Power Cord 10′
- Standard Discharge Size 1½″ NPT
- Solids Handling ½″
Ion Technologies 35ACi Battery Backup Inverter
Features:
- Fully automatic, converts 12 volt DC to 120 volt AC when power is lost
- Runs ⅓ HP pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Uses one, Power Plus 12 volt deep cycle AGM battery. (battery included)
- Non-corrosive battery enclosure
- Quick and easy installation
- 3 year warranty (1 year on Genesis controller)
Specifications:
- Mains A.C. Lower Voltage Limit - 90 VAC ± 5V
- Output Voltage with Full Load - 110 - 120V ± 10 V
- Maximum Output Power - 5.5 FLA
- Battery Lower Voltage Limit - 10.5 VDC ± 0.2 V
- Output Frequency Main Output Frequency: Same as Input
- DC Input - 12 VDC
- Battery Charger Boost Voltage - 13.7 ± 0.2 V
- Overload - 130% ± 3% (With Auto Reset Function)
35ACi Power Pac System Brochure
AC35 Product Brochure
Ion Genesis® II Sump Pump Controller
Features:
- Ion® digital level sensors
- First of its kind solid-state sensing technology with no moving parts
- Multipoint sealing mechanism that supersedes single surface seals
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
- Voltage: 120 VAC, 60 Hz
- Output Capacity (per outlet): ½ HP, 12 FLA, 15 amp max, 72 LRA
- Remote Alarm Contacts: Normally closed (open during alarm state) 30 V/DC @ 1 amp max
- Temperature Range: 32º F to 104º F (0º C to 40º C)
- Audible Alarm: 80 dB @ 10 ft.
- Enclosure: NEMA-1 UL94V-0 ABS
- Mounting Hardware (controller): (4) #10 Screws (not included)
- Mounting Dimensions (controller): 8.25" X 3.5"
- 3 year warranty
Specifications:
- Voltage: 120 VAC, 60 Hz
- Output (per outlet): 15 Amps (max)
- Pump load(s) max: total - 12 Amps
- Remote Alarm Contacts: Normally closed (open during alarm state) 30 VAC/DC @ 1 A MAX
- Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
- Audible Alarm: 80 dB at 10 ft.
- Enclosure: NEMA-1 UL94V-0 ABS
- Mounting Hardware (Controller): (4) #10 screws
- Mounting Dimensions (Controller): 8.25” x 3.50”
